EWS synthesizer volume

[bjorn]

When recording the output from MIDI tracks to audio tracks using Wave record the volume is to low. I don't know how to control this. The result is that the recorded wave track has a very poor level.
BTW, I have disabled the Codec on my EWS64 since it is so noisy.

Please help, getting desperate.

/bjorn

[hati]

Hi!
If you have EWS64XL and use by own sounds,try this. Connect digital out to digital in (fornt panel).Set record digital in. No noise, no level problem or clitching.

[bjorn]

Thanks for the tip Hati, I will try this later today.
Another question: I have the same problem (the low levels) when recording from IN-2 (audio in). I'm not sure, but it can partly be a problem with the output signal of the JV1010 (which I record this way), but I also get low levels from my microphone (connected to a Tubeamp and lined in to IN-2).

Will the sollution you proposed work for the IN-2 as well? I want to be able to switch between Mix record and Audio in record!

best regards
/bjorn

[hati]

Hi! Bjorn
I have allso JV1010 directly IN 2 and but i dont have that kind a problem and when i record vocal or guitar or bass i use little mixer by using IN 1 or IN 2(wave record). This what i propose (digital record) helps you avoid all you computer electrical problems when you want made mixdown. Sorry i dont understand what you mean mix record?

Yours/hati

[bjorn]

Hi Hati,
by Mix record and Audio in record I mean the switch in the FX panel to choose between recording an audio signal and the signal from the mixer (for the EWS synth).

I'm a little confused; when I record the IN-2 signal (JV-1010) I turn the IN-2 fader to the top to get the maximum recording level. On the JV-1010 I turned the volume knob to the maximum also. But; when recording in the sequencer (with wave record) the recorded level is very poor). What do I do wrong?

best
/bjorn

[hati]

Hi Bjorn!
Sorry this could be a stupid question. But are you using 44.1kHz? Are you using cubase? Try to record JV1010 In-1 is the result still poor? If you need mixer setting? i dont know how i can send that to you?

Yours Hati

[This message has been edited by hati (edited January 17, 2000).]

[hati]

Hi Bjorn!
Do you have still a problem to record your JV1010? So try this.
I upload mixer settings in EWS64/Downloadpage/miscellaneus/recews&ext.ttm. That is what i use, and works fine.
(It records both in same time EWS64&JV1010 in1). I use in2 to record vocal,guitar,bass...

Yours hati